Research Article
BibTex RIS Cite

Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes

Year 2022, Volume: 1 Issue: 2, 1 - 7, 01.06.2022

Ayşe Erkan Engin Tan İsmail Ovalı Çelebi Ersoy Sinan Aksöz Rüçhan Yıldız

Abstract

Mould steels have short service life because of subjected to continuous impact loadings. So several industrial surface treatments are used to improve hardness and wear resistance such as gas nitriding/nitrocarburizing/carbonitriding. In this study, gas nitriding and nitrocarburizing (GN+NC), and carbonitriding (CN) processes were carried out to D2 mould steel in industrial conditions, and the results were investigated by comparing the hardness and wear properties. Nitrided and untreated samples subjected to microstructural investigation, hardness measurements and dry sliding wear tests. As a result of the experimental studies, it was found that different nitriding processes significantly enhanced wear resistance of the samples.

Keywords

Wear Gas Nitriding Nitrocarburizing Carbonitriding Mould Steel D2

References

  • [1] https://industeel.arcelormittal.com/wp-content/uploads/2021/02/DS-TOOL-D2.pdf
  • [2] J.C.Díaz-Guillén, M.Naeem, H.M.Hdz-García, J.L.Acevedo-Davila, M.R.Díaz-Guillén, M.A.Khan, Javed Iqbal, A.I.Mtz-Enriquez (2020). Duplex plasma treatment of AISI D2 tool steel by combining plasma nitriding (with and without white layer) and post-oxidation. Surf. Coat. Technol; 385: pp. 1-14.
  • [3] K.T. Cho, K. Song, S.H. Oh, Y.-K. Lee, W.B. Lee. (2014). Enhanced surface hardening of AISI D2 steel by atomic attrition during ion nitriding. Surf. Coat. Technol; 251 pp: 115-121.
  • [4] M. Stoiber, J. Wagner, C. Mitterer, K. Gammer, H. Hutter, C. Lugmair, R. Kullmer. (2003). Plasma-assisted pre-treatment for PACVD TiN coatings on tool steel. Surf. Coat. Technol; 174–175: pp. 687-693.
  • [5] M.H. Staia, Y. Perez-Delgado, C. Sanchez, A. Castro, E. Le Bourhis, E.S. Puchi-Cabrera. (2009). Hardness properties and high-temperature wear behavior of nitrided AISI D2 tool steel, prior and after PAPVD coating. Wear, 267: pp. 1452-1461.
  • [6] M. Uma Devi, T.K. Chakraborty, O.N. Mohanty. (1999). Wear behaviour of plasma nitrided tool steels. Surf. Coat. Technol; 116–119: pp. 212-221.
  • [7] Mathew Alphonse, V.K Bupesh Raja, Manoj Gupta. 2020. Optimization of plasma nitrided, liquid nitrided & PVD TiN coated H13-D2 friction drilling tool on AZ31B magnesium alloy. Materials Today, Proceedings.
  • [8] M.H. Staia, Y. Pérez-Delgado, C. Sanchez, A. Castro, E. Le Bourhis, E.S. Puchi-Cabrera. (2009). Hardness properties and high-temperature wear behavior of nitrided AISI D2 tool steel, prior and after PAPVD coating. Wear, 267(9–10): pp. 1452-1461.
  • [9] Daniel Toboła, Bogusz Kania. (2018). Phase composition and stress state in the surface layers of burnished and gas nitrided Sverker 21 and Vanadis 6 tool steels. Surf. Coat. Technol; 353: pp. 105-115.
  • [10] P.A. Dearnley, A. Matthews, A. Leyland. (2015). 5 - Tribological behaviour of thermochemically surface engineered steels. Editor(s): Eric J. Mittemeijer, Marcel A.J. Somers, Thermochemical Surface Engineering of Steels, Woodhead Publishing; pp. 241-266.
  • [11] Daniel Toboła, Witold Brostow, Kazimierz Czechowski, Piotr Rusek. (2017). Improvement of wear resistance of some cold working tool steels. Wear, Volumes 382–383: pp. 29-39.
  • [12] E. Ersöz, İ. Ovalı. (2018). The effects of the industrial cryogenic process on the wear behaviours of AISI D2 cold work tool steels. Journal of Polytechnic; 21(2):411-417.
  • [13] Y. Kaplan. (2020). Role of Reinforcement Materials on Mechanical and Tribological Properties of PTFE Composites. Polymer Korea; 44(4): 436-444.
  • [14] Guang Chen, Jun Wang, Hongyuan Fan, Danqi Wang, Xiaoying Li, Hanshan Dong. (2019). Combat molten aluminum corrosion of AISI H13 steel by low-temperature liquid nitrocarburizing. Journal of Alloys and Compounds; Volume 776: pp. 702-711.
  • [15] P. Nurthen, O. Bergman, I. Hauer. (2008). Carbide design in wear resistant powder materials. in: Proceedings of the PM 2008 World Congress in Washington, DC, pp. 1–16.
  • [16] Insup Lee. (2019). Combination of plasma nitriding and nitrocarburizing treatments of AISI 630 martensitic precipitation hardening stainless steel. Surf. Coat. Technol; Volume 376: pp. 8-14.
  • [17] Karamboiki, C.-M. et al. (2013). Influence of microstructure on the sliding wear behavior of nitrocarburized tool steels. Wear 303: 560-568.

Year 2022, Volume: 1 Issue: 2, 1 - 7, 01.06.2022

Ayşe Erkan Engin Tan İsmail Ovalı Çelebi Ersoy Sinan Aksöz Rüçhan Yıldız

Abstract

References

  • [1] https://industeel.arcelormittal.com/wp-content/uploads/2021/02/DS-TOOL-D2.pdf
  • [2] J.C.Díaz-Guillén, M.Naeem, H.M.Hdz-García, J.L.Acevedo-Davila, M.R.Díaz-Guillén, M.A.Khan, Javed Iqbal, A.I.Mtz-Enriquez (2020). Duplex plasma treatment of AISI D2 tool steel by combining plasma nitriding (with and without white layer) and post-oxidation. Surf. Coat. Technol; 385: pp. 1-14.
  • [3] K.T. Cho, K. Song, S.H. Oh, Y.-K. Lee, W.B. Lee. (2014). Enhanced surface hardening of AISI D2 steel by atomic attrition during ion nitriding. Surf. Coat. Technol; 251 pp: 115-121.
  • [4] M. Stoiber, J. Wagner, C. Mitterer, K. Gammer, H. Hutter, C. Lugmair, R. Kullmer. (2003). Plasma-assisted pre-treatment for PACVD TiN coatings on tool steel. Surf. Coat. Technol; 174–175: pp. 687-693.
  • [5] M.H. Staia, Y. Perez-Delgado, C. Sanchez, A. Castro, E. Le Bourhis, E.S. Puchi-Cabrera. (2009). Hardness properties and high-temperature wear behavior of nitrided AISI D2 tool steel, prior and after PAPVD coating. Wear, 267: pp. 1452-1461.
  • [6] M. Uma Devi, T.K. Chakraborty, O.N. Mohanty. (1999). Wear behaviour of plasma nitrided tool steels. Surf. Coat. Technol; 116–119: pp. 212-221.
  • [7] Mathew Alphonse, V.K Bupesh Raja, Manoj Gupta. 2020. Optimization of plasma nitrided, liquid nitrided & PVD TiN coated H13-D2 friction drilling tool on AZ31B magnesium alloy. Materials Today, Proceedings.
  • [8] M.H. Staia, Y. Pérez-Delgado, C. Sanchez, A. Castro, E. Le Bourhis, E.S. Puchi-Cabrera. (2009). Hardness properties and high-temperature wear behavior of nitrided AISI D2 tool steel, prior and after PAPVD coating. Wear, 267(9–10): pp. 1452-1461.
  • [9] Daniel Toboła, Bogusz Kania. (2018). Phase composition and stress state in the surface layers of burnished and gas nitrided Sverker 21 and Vanadis 6 tool steels. Surf. Coat. Technol; 353: pp. 105-115.
  • [10] P.A. Dearnley, A. Matthews, A. Leyland. (2015). 5 - Tribological behaviour of thermochemically surface engineered steels. Editor(s): Eric J. Mittemeijer, Marcel A.J. Somers, Thermochemical Surface Engineering of Steels, Woodhead Publishing; pp. 241-266.
  • [11] Daniel Toboła, Witold Brostow, Kazimierz Czechowski, Piotr Rusek. (2017). Improvement of wear resistance of some cold working tool steels. Wear, Volumes 382–383: pp. 29-39.
  • [12] E. Ersöz, İ. Ovalı. (2018). The effects of the industrial cryogenic process on the wear behaviours of AISI D2 cold work tool steels. Journal of Polytechnic; 21(2):411-417.
  • [13] Y. Kaplan. (2020). Role of Reinforcement Materials on Mechanical and Tribological Properties of PTFE Composites. Polymer Korea; 44(4): 436-444.
  • [14] Guang Chen, Jun Wang, Hongyuan Fan, Danqi Wang, Xiaoying Li, Hanshan Dong. (2019). Combat molten aluminum corrosion of AISI H13 steel by low-temperature liquid nitrocarburizing. Journal of Alloys and Compounds; Volume 776: pp. 702-711.
  • [15] P. Nurthen, O. Bergman, I. Hauer. (2008). Carbide design in wear resistant powder materials. in: Proceedings of the PM 2008 World Congress in Washington, DC, pp. 1–16.
  • [16] Insup Lee. (2019). Combination of plasma nitriding and nitrocarburizing treatments of AISI 630 martensitic precipitation hardening stainless steel. Surf. Coat. Technol; Volume 376: pp. 8-14.
  • [17] Karamboiki, C.-M. et al. (2013). Influence of microstructure on the sliding wear behavior of nitrocarburized tool steels. Wear 303: 560-568.
There are 17 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Research Articles
Authors

Ayşe Erkan This is me 0000-0002-6060-1815

Engin Tan

İsmail Ovalı

Çelebi Ersoy This is me 0000-0002-6016-2971

Sinan Aksöz

Rüçhan Yıldız This is me 0000-0002-5973-5496

Publication Date June 1, 2022
Published in Issue Year 2022 Volume: 1 Issue: 2

Cite

APA Erkan, A., Tan, E., Ovalı, İ., Ersoy, Ç., et al. (2022). Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes. Cukurova University Journal of Natural and Applied Sciences, 1(2), 1-7.
AMA Erkan A, Tan E, Ovalı İ, Ersoy Ç, Aksöz S, Yıldız R. Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes. Cukurova University Journal of Natural and Applied Sciences. June 2022;1(2):1-7.
Chicago Erkan, Ayşe, Engin Tan, İsmail Ovalı, Çelebi Ersoy, Sinan Aksöz, and Rüçhan Yıldız. “Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes”. Cukurova University Journal of Natural and Applied Sciences 1, no. 2 (June 2022): 1-7.
EndNote Erkan A, Tan E, Ovalı İ, Ersoy Ç, Aksöz S, Yıldız R (June 1, 2022) Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes. Cukurova University Journal of Natural and Applied Sciences 1 2 1–7.
IEEE A. Erkan, E. Tan, İ. Ovalı, Ç. Ersoy, S. Aksöz, and R. Yıldız, “Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes”, Cukurova University Journal of Natural and Applied Sciences, vol. 1, no. 2, pp. 1–7, 2022.
ISNAD Erkan, Ayşe et al. “Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes”. Cukurova University Journal of Natural and Applied Sciences 1/2 (June 2022), 1-7.
JAMA Erkan A, Tan E, Ovalı İ, Ersoy Ç, Aksöz S, Yıldız R. Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes. Cukurova University Journal of Natural and Applied Sciences. 2022;1:1–7.
MLA Erkan, Ayşe et al. “Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes”. Cukurova University Journal of Natural and Applied Sciences, vol. 1, no. 2, 2022, pp. 1-7.
Vancouver Erkan A, Tan E, Ovalı İ, Ersoy Ç, Aksöz S, Yıldız R. Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes. Cukurova University Journal of Natural and Applied Sciences. 2022;1(2):1-7.