Redirecting to http://dergipark.org.tr/_fragment?_hash=i2aQ7SXD5Q68l-51-zM-1bp1bxB1RkIpKatDVLkF51g&_path=id%3D1598059%26_format%3Dhtml%26_locale%3Den%26_controller%3DApp%255CController%255CSite%255CArticleController%253A%253AesiArticleStats.
Conference Paper
BibTex RIS Cite

Year 2024, Volume: 32, 101 - 105, 30.12.2024

Vladislav Pishchikov Sergey Kuzmin Valeriy Chigirinsky Andrey Marukov Abdrakhman Naizabekov Irina Volokitina

https://doi.org/10.55549/epstem.1598059

Abstract

References

  • Pishchikov, V., Kuzmin, S., Chigirinsky, V., Marukov, A., Naizabekov, A., & Volokitina, I. (2024). Research of combined copper processing technology including heat treatment and radial-shear rolling. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 32, 101-105.

Research of Combined Copper Processing Technology Including Heat Treatment and Radial-Shear Rolling

Year 2024, Volume: 32, 101 - 105, 30.12.2024

Vladislav Pishchikov Sergey Kuzmin Valeriy Chigirinsky Andrey Marukov Abdrakhman Naizabekov Irina Volokitina

https://doi.org/10.55549/epstem.1598059

Abstract

This paper is devoted to the study of the influence of a combined technology, including both preheat treatment and deformation on a radial-shear rolling mill, on changes in the mechanical properties of M1 grade copper. The conducted studies have shown that after preliminary heat treatment, namely quenching at a temperature 500°C, and subsequent deformation of billets at temperatures of 20 and 200°C on a radial-shear rolling mill, an increase in the strength properties of copper is observed with a decrease in its plastic properties within the normal range. Also, according to the results of the conducted studies, it was found that the crosssection of the obtained copper bars shows a spread of microhardness values, which fully correlates with the data on the formation of areas with different microstructures after radial shear rolling in this cross-section.

Keywords

Combined technology Pre-heat treatment Radial shear rolling Copper Mechanical properties Microhardness

References

  • Pishchikov, V., Kuzmin, S., Chigirinsky, V., Marukov, A., Naizabekov, A., & Volokitina, I. (2024). Research of combined copper processing technology including heat treatment and radial-shear rolling. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 32, 101-105.
There are 1 citations in total.

Details

Primary Language English
Subjects Classical Physics (Other)
Journal Section Articles
Authors

Vladislav Pishchikov

Sergey Kuzmin

Valeriy Chigirinsky

Andrey Marukov

Abdrakhman Naizabekov

Irina Volokitina

Early Pub Date December 10, 2024
Publication Date December 30, 2024
Submission Date April 10, 2024
Acceptance Date July 2, 2024
Published in Issue Year 2024 Volume: 32

Cite

APA Pishchikov, V., Kuzmin, S., Chigirinsky, V., … Marukov, A. (2024). Research of Combined Copper Processing Technology Including Heat Treatment and Radial-Shear Rolling. The Eurasia Proceedings of Science Technology Engineering and Mathematics, 32, 101-105. https://doi.org/10.55549/epstem.1598059
Creative Commons License